425-watt, 5.1-channel, roku ready networked audio/video receiver with harman truestream, bluetooth technology and five hdmi inputs including a mobile high-definition link (mhl) port (3 pages)
• Do not place the AVR in moist or humid locations, in extremely hot or cold locations, in areas near heaters or heat registers, or in direct sunlight. For more detailed speaker placement information, download the complete AVR 1650/ Connections AVR 165 Owner’s Manual from www.harmankardon.com.
AVR 1650, AVR 165 Connections Connect Your Speakers Connect Your Subwoofer How to use the AVR's speaker terminals: Use a single RCA audio cable to connect the AVR's Subwoofer Pre-Out connector to your subwoofer. Consult your subwoofer’s user manual for specific information about making connections to it.
AVR via the HDMI Monitor Out connection’s AVR DVD Component Video Connectors Audio Return Channel, and it will not require additional audio connections to the AVR. Refer to the complete AVR 1650/AVR 165 Owner’s Manual, downloadable at www. harmankardon.com, for details. AVR HDMI Connectors Component Video...
Page 5
AVR 1650, AVR 165 Connections Composite Video Devices Coaxial Digital Audio Devices You will need to make composite video connections from your source devices that do If your source devices have coaxial digital outputs, connect them to the AVR's coaxial not have HDMI or component video connections.
AVR 1650, AVR 165 Connections Audio Recorders Video Recorders Connect an analog audio recorder’s inputs to the AVR's analog audio Tape Out connectors. Connect an analog video recorder’s video input connector to the AVR's Video 2 Out You can record any analog audio input signal.
Bend and fold base NOTE: For instructions on connecting the Trigger output to compatible equipment, please download the AVR 1650/AVR 165 Owner’s Manual from www.harmankardon.com. NOTE: Remove the protective plastic from the AVR's front panel to keep it from reducing the remote control’s effectiveness.
AVR 1650, AVR 165 Connections Configure Your Speakers 5. Use the remote’s arrow and OK buttons to select “EzSet/EQ.” 1. Plug the supplied EzSet/EQ™ microphone into the AVR's Headphone connector. EzSet/EQ Headphone Connector Place Microphone at listening position and plug into Headphone Jack...
When you’re finished, press the remote’s OSD button to turn off the on-screen menu. You are now ready to enjoy your AVR! IMPORTANT: For complete information about using all of your audio/video receiver’s features and capabilities, download the AVR 1650/AVR 165 Owner’s Manual from www. harmankardon.com. General Specifications Power consumption (AVR 1650): <0.5W (standby);...