Miele T 4819 Ci Operating Instructions Manual page 35

Problem
The Start/Stop button is
flashing slowly and the
display is dark.
Sometimes a
programme cannot be
started and the
corresponding
programme indicator
light does not light up.
The Start/Stop button
flashes on and off.
Possible cause
The dryer is in Standby
mode.
This is quite normal and
not indicative of any fault.
No obvious cause.
The flashing indicates
that a programme can be
started.
Problem solving guide
Remedy
See "Programmable
functions".
– Switch the dryer off
and back on again.
– Select one of the
programmes that
would not start.
– If it still will not start,
there is a fault. Contact
the Miele Service
Department.
After the programme has
started, the flashing will
change to a constant
light.
35