Samsung DP505A2G-K01AU User Manual page 80

Using the TPM Security Device
4
Press the F10 key to save the changes.
5
When the system reboots, press the corresponding key(s) by
following the onscreen instructions.
6
When the computer restarts automatically and the Samsung
logo screen appears, press the F2 key repeatedly.
7
Select the Security > TPM Configuration > Change TPM
Status item and set the item to Enable and Activate.
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Enabled
TPM Device
Clear
TPM State
Enabled & Activate
Security Chip State
Clear
Enabled & Activate
Deactivate & Disable
(Optional)
8
Press the F10 key to save the changes.
9
When the system reboots, press the corresponding key(s) by
following the onscreen instructions.
10
Press the F10 key to save the changes. The computer
automatically restarts. Initialization of the TPM chip has been
completed. Now, install the TPM program and register the
TPM program.
Chapter 3.
79
Using the computer