Chapter 08
System
Multi Control
MENUm →
System
→
Multi Control
→ ENTERE
Multi Control
ID Setup
ID Input
MDC Connection
RS232C MDC
- The displayed image may differ depending on the model.
Configuring settings for Multi Control
ID Setup
•
Assign an ID to a set. (Range: 0~99)
Press ▲ or ▼ to select a number, and press E.
ID Input
•
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
00
MDC Connection
•
--
Select a method to connect to MDC to receive the MDC signal.
RS232C
MDC: Communicate with MDC via the RS232C-stereo cable.
-
RJ45
MDC: Communicate with MDC via the RJ45 cable.
-
117