Hardware Health Event Monitoring Screen - ASROCK H77WS-DL User Manual

3.5 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
CPU Fan 1 & 2 Setting
This allows you to set CPU fan 1 & 2's speed. Confi guration options: [Full
On] and [Automatic Mode]. The default value is [Full On].
Chassis Fan 1 Setting
This allows you to set chassis fan 1's speed. Confi guration options:
[Full On], [Manual Mode] and [Automatic Mode]. The default value is [Full
On].
Chassis Fan 2 Setting
This allows you to set chassis fan 2's speed. Confi guration options:
[Level 1] to [Level 4]. The default is value [Level 4].
Over Temperature Protection
Use this to enable or disable Over Temperature Protection. The default
value is [Enabled].
Case Open Feature
This allows you to enable or disable case open detection feature. The de-
fault is value [Enabled].
Clear Status
This option appears only when the case open has been detected. Use this
option to keep or clear the record of previous chassis intrusion status.
64