Administration > Firmware Upgrade; Administration > Config Management; Status > Router - Linksys WRT54GL User Manual

Chapter 3
Administration > Firmware Upgrade
The Administration > Firmware Upgrade screen allows you
to upgrade the Router's firmware . Do not upgrade the
firmware unless you are experiencing problems with the
Router or the new firmware has a feature you want to use .
Administration > Firmware Upgrade
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website, www .
linksys .com . Then extract the file .
Upgrade Firmware
Please select a file to upgrade
the extracted firmware upgrade file . Then click Upgrade
and follow the on-screen instructions .
Administration > Config Management
This screen is used to back up or restore the Router's
configuration file .
Administration > Config Management
Backup Configuration
To back up the Router's configuration file, click Backup .
Then follow the on-screen instructions .
Restore Configuration
Please select a file to restore
the configuration file . Then click Restore .
Wireless-G Broadband Router
Click Browse and select
Click Browse and select
Advanced Configuration
Status > Router
The Status > Router screen displays the Router's current
status .
Administration > Factory Defaults
Router Information
Firmware Version This is the Router's current firmware .
Current Time This shows the time, as you set on the
Setup tab .
MAC Address
This is the Router's MAC Address, as seen
by your ISP .
Router Name
This is the specific name for the Router,
which you set on the Setup tab .
Host Name If required by your ISP, this would have been
entered on the Setup tab .
Domain Name
If required by your ISP, this would have
been entered on the Setup tab .
Internet
Configuration Type
This section shows the current network information
stored in the Router . The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen .
Click Refresh to update the on-screen information .
20