Advertisement
Quick Links
Advertisement
Related Manuals for Genelec AIW26
Summary of Contents for Genelec AIW26
- Page 1 Genelec AIW26 Installation and In-wall Speaker System Operating Manual...
-
Page 2: Installation
The matching units are marked with the same ID number on the reflex port of the AIW26 and the top panel of the RAM1. Speaker placement Genelec AIW26 speakers are equipped with Genelec’s proprietary Directivity Control... - Page 3 See Table 1 for recommended cable gauges. The binding posts accept a cable up to 6 (9 gauge). If you are installing the AIW26 system to an existing wall, examine the walls thoroughly for the shortest and least obstructed cable route.
- Page 4 Do not use both inputs at the same time. Con- sult your Genelec dealer for the choice of signal cables. The RAM1 has a provision for remote control- led switching between “ON”...
-
Page 5: Maintenance
In a double corner (wall/wall or wall/ceiling) In a triple corner (wall/wall/ceiling) If the speaker is positioned behind a perforated screen, add +2 dB to the Treble Tilt setting to compensate Table 3. Suggested room response control settings for differing acoustical environments ered with a piece of plexiglass to protect the settings. -
Page 6: System Specifications
Required cut-out dimensions Height: Width: Depth: *Note: The mounting brackets of the AIW26 need a clearance inside the wall of at least 125 millimeters (5”) above the top edge of the cut-out and 65 mm (2 ”) below the lower edge.