Remote Control Functions - Harman Kardon HD 990 Owner's Manual

HD 990
HD 990 Remote Control Functions
Power Off
Power On
Numeric Controls
Program Button
Clear Button
Repeat Button
Repeat A B Button
Skip Buttons
Search Buttons
Play/Pause Button
Stop Button
+10/–10 Buttons
Random Button
Time Button
Check Button
Open/Close Button
Display Button
Folder Buttons
Source Button
Info Button
Power Off: Press this button to put the unit in the Standby mode.
Power On: Press this button to turn on the CD player. Note that in order for the
Power On button to operate, AC power must be applied to the unit, and the Status Mode
Indicator should glow orange (see page 9 for more information). The unit will also
turn on when the Play or Open/Close
Numeric Controls: Press these buttons to select a specific track on a disc. The unit
will immediately search for the track and begin to play it. For tracks 1 through 9 on a disc,
you need only press the desired number. For tracks 10 and above, the second and third
digit of the number must be entered within two seconds of the first digit. (See page 9 for
more information.) These buttons are also used to enter track numbers into the memory
for pre-programmed play lists. (See page 11 for complete information on programming
the CD player.)
Program Button: Press this button to begin the process of programming the CD
player to play the tracks on a disc in a specific order. Once the button is pressed, enter
each of the desired track numbers in quick succession using the Numeric Controls button
. When you have entered the tracks to be played, press the Play button
the programmed sequence. (See page 11 for complete information on programming the
CD player.)
programmed sequence. (See page 11 for complete information on programming the CD
player.)
played, and note that the Repeat and One indicators will light in the Information Display.
Press the button a second time so that the Repeat and All indicators are illuminated to
repeat all tracks on the disc. (See page 12 for more information on Repeat Play.)
button once to mark the start of the portion to be repeated. Press it again at the end of
the desired sequence. The marked passage will play continuously until the Stop button
move back to the previous track
backward
played. Holding the buttons pressed for some seconds will increase the search speed
(see page 10).
drawer is open, pressing this button will automatically close the drawer. Press this button
once during playback to momentarily stop a disc. When the button is pressed again, the
disc will resume play at the point it was stopped.
from the program mode (see page 11 for complete information).
track playing. Press the –10 button to move to the 10th track before the track currently
playing.
(See page 9 for more information.)
display will show the running time of a track being played. Press the button once to check
the time remaining for the track in play. Press the button a third time to view the elapsed
time for the CD being played, and a last time for the total play time remaining for the disc
in play (see page 10).
CD player's memory. (See page 11 for complete information on programming the CD
player.)
may also be closed by pressing the Play button
of the drawer. However, we do not recommend pushing the drawer, as damage to the
transport mechanism may result.
brightness. Press it again to turn the display lights off completely. Another press will
return the display to normal brightness.
data, and the Folder – button to move to the previous folder with MP3 data.
output of other sources connected to one of the digital inputs
button is pressed.
information).
information available on a CD, or ID3 and other information available on a disc with MP3
data. To return to normal Track number/Time indication, press the Time button
page 10 for more information.)
to begin

Remote Control Functions

Clear Button: Press this button to remove selected or all tracks from the
Repeat Button: Press this button once to repeat only the track that is currently being
Repeat A-B Button: Press this button to repeat a segment of the disc. Press the
is pressed. (See page 12 for more information on Repeat Play.)
Skip Buttons: Press one of these buttons to move to the next track
(see page 10).
Search Buttons: Press one of these buttons to search forward
through a disc to locate a particular portion of the selection being
Play/Pause Button: Press this button to start the playback of a CD. If the CD
Stop Button: Press this button to stop the disc currently being played or to escape
+10/–10 Buttons: Press the +10 button to move to the 10th track after the current
Random Button: Press this button to have all of the tracks played in a random order.
Time Button: Press this button to select the time display. In normal operation, the
Check Button: Press this button to check the order of tracks programmed into the
Open/Close Button: Press this button to open or close the disc drawer. The drawer
Display Button: Press this button once to dim the front panel display to half
Folder Buttons: Press the Folder + button to move to the next folder with MP3
Source Button: Press this button to switch between the CD player's output and the
Info Button: Pressing this button consecutive times shows the different CD text
, or to
or
or by gently pressing the edge
(see page 10 for more
. (See
7