Connecting The Water Hose; When The Water System Is Started For The First Time; Electrical Cord - Electrolux EUFG29800W User Manual

Connecting the water hose.

The water coupling is connected to a
water tap with an external 3/4 inch
thread.
This work is to be carried out by a
skilled plumbing installation technician.
The appliance is to be connected with
a shut-off cock. There are different
type-approved taps and tap
assemblies on the market.
The water hose must not be cracked,
squeezed or be in tight bends.
If you require a longer water hose than
that supplied, then a VDE-approved
150 38 85-02/0 supply hose should be
used.
Before the appliance is taken into use
in its final location, ensure that the
water connection has been correctly
carried out, that there is no leakage at
the connection to the appliance water
valve or to the water tap, and that the
four spacers are properly in position,
see the illustration.
21
We recommend that the appliance is
placed on a "run-off" mat intended for
refrigerators and freezers, which
makes it easier to detect possible
leakage.
When the water system is started for
the first time.
The following should be carried out
when the appliance is correctly
connected to the water supply in the
building:
Open the tap on the water connection
and start up the appliance. The ice
machine starts automatically. It will
start filling with water will start when
the temperature is sufficiently low. Do
not use ice produced during the first
day since there is risk of a slight taste.

Electrical cord

Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.