Technical Specifications; Installation; Positioning - Electrolux EU1070T Instruction Manual

Hide thumbs Also See for EU1070T:
Table of Contents

Advertisement

Technical Specifications

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY(*)
GROSS CAPACITY
NET CAPACITY
STAR RATING
(*)This figure is based on standard test results in accordance with the European Standard EN153. Actual
consumption will depend on how the appliance is used and where it is located.

Installation

Positioning

For this appliance to work efficiently, it must not be
located where the temperatures will fall below 10¡C
(50¡F)
or
rise
above
conservatories.
For correct operation this appliance must be located
in a dry atmosphere, away from heat sources, e.g.
cookers, radiators, boilers and direct sunlight.
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
should be 100mm (4Ó) between the top of the cabinet
and any overhanging kitchen furniture. Alternatively
allow 50mm (2Ó) between the top of the cabinet and
any overhanging kitchen furniture and a gap of
25mm (1Ó) on either side of the appliance.
A
NP006
Do not obstruct the space underneath. The back of
the cabinet may be placed close to the wall but must
not touch it. DO NOT install in places with restricted
ventilation.
12
32¡C
(90¡F),
e.g.
B
Height
Width
Depth
220-240 V / 50 Hz
110 W
0,77 kWh
100 l
(3,54 cuft)
80 l
(2,82 cuft)
Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.
D200
85
cm
59.5
cm
60
cm

Advertisement

Table of Contents
loading

Table of Contents