Table of Contents
Advertisement
3. CONFIGURATION OF YOUR
APPLIANCE
When your appliance is connected to the electrical
network, turn the programme selector on the Cotton posi-
tion. You can then configurate your washing machine ac-
cording the following parameters :
3.1. Language
When you switch on your washing machine for the first
time (programme selector on the cotton programme), the
language that will appear in the display window will be En-
glish.
Note: If you want to change this language, please follow
the following instructions :
•
Press the "Spin
neously for at least 2 seconds,
•
Press the "Change" button to select the required lan-
guage,
•
Press the "Exit" button to confirm your choice.
Language :
ENGLISH
3.2. Clock
Setting the time is important because the end of cycle time
display depends on it. To set the time :
•
Press the "Options" button until the "Setup" option
appears,
•
Press the "Change" button once to go into the "Setup"
option,
•
Press the "Options" button to select the "Clock" menu,
•
The time changes in minute stages just by pressing
the "Change" button. The time changes in 10 minute
stages by holding the "Change" button down.
•
Press the "Exit" button to confirm your choice. Then
press it once more to go back to the programme selec-
tion.
Clock:
Set time:
" and "Options" buttons simulta-
Change
Options
Change
Options
3.3. Permanent extra rinse
Your washing machine is economical with water. But in
some cases, depending on the hardness of the water or if
you have sensitive skin, it may be useful to rinse with more
water.
•
Press the "Options" button until the "Setup" option
appears,
•
Press the "Change" button once to go into the "Setup"
option,
•
Press the "Options" button to select the "Rinse +"
menu,
•
Press the "Change" button to select the Rinse + option
or not (YES / NO in the display window),
•
Press the "Exit" button to confirm your choice. Then
press it once more to go back to the programme selec-
tion
When "Rinse +" mode is selected two additional rinses
take place in the Cotton programmes and one extra rinse
for the Synthetics and Delicates programmes. In addition,
the symbol
window.
Rinse+
Yes
Exit
3.4. Brightness
To set the brightness of the display window:
•
Press the "Options" button until the "Setup" option
appears.
•
Press the "Change" button once to go into the "Setup"
option.,
•
Press the "Options" button to select the "Brightness"
menu,
•
Press the "Change" button to set the required bri-
ghtness level,
•
Press the "Exit" button to confirm your choice. Then
press it once more to go back to the programme selec-
tion.
16.04
Brightness:
I--------->--------I
Exit
5
will appear in the options line in the display
Change
Options
Change
Options
Exit
Exit
Hide quick links:
Advertisement
Table of Contents
