Heat Controller Energy Knight B/A-HMC30AS Service Manual page 45

Remove the grille from the chassis.
• Remove the 4 securing screws.(30K, 32K)
• To remove the Grille, pull the lower left and right side
of the grille toward you (slightly tilted) and lift it
straight upward.
2. To remove the sensor, housing connector, earth
conductor and step motor conductor with sensor
holder, Motor, Evaporator and P.C.B.
Earth
Conductor
- 45 -
30K
32K
Motor
Conductor
Power
Conductor
Sensor
Conductor
Step Motor
Conductor