Installation; Location - Electrolux EKE 5001 Instruction Book

It is mandatory that all operations required for
QUALIFIED PERSONNEL
installation in accordance with existing rules and
regulations.
The appliance must be installed in accordance
with " X " specification (EN60.335-2.6). The
cooker must not be installed higher than the
cooker hob top.
Please ensure that when the appliance is
installed it is easily accessible for the
engineer in the event of a breakdown.
The cooker has been registered as a "Class
X"appliance according to Fire Risk Regulations.
Any adjacent cabinets or walls must not exceed
the cooker's height.
The cooker may be located in a kitchen, a
kitchen/diner or bed sitting room, but not in a
bathroom or shower room.
The minimum distance combustible material can
be fitted above the cooker in line with the edges
of the cooker is 69 cm (see fig.)
The cooker should be placed only on the
floor, but not on the base.
Levelling
The appliance is provided with adjustable small
feet placed in the back and front corners od the
base.
By adjusting the small feet it is possible to
change the height of the appliance so as to
ensure a better levelling with other surfaces and
a uniform distribution of the liquids contained in
pans or pots.

INSTALLATION

carry out the

LOCATION

Before your appliance is connected to the mains
electricity supply, check to ensure that the
voltage and the frecquency shown in the rating
label correspond with your supply voltage.
This appliance must be earthed.
min 15 cm
61 cm
5