Lenovo Think Vision LT2013p User Manual page 13

8. Connect one end of the USB cable to the USB upstream terminal on the side of the
monitor, and connect the other end of the USB cable to an appropriate USB port on your
device.
9. Isnsert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to
IEC 60227 (designation H05VV-F 3G 0.75mm
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
2
) shall be
1-9
Chapter 1.