Power Management Setup - Abit SI-1Ns40 User Manual

BIOS Setup 3-15

3.5. Power Management Setup

ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1 (PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3 (Suspend-To-RAM)]: Enables the Suspend to RAM function.
Resume by OnChipset USB:
When set to [Enabled], this item allows you to use a USB device to wake up a system
that is in the S3 (STR - Suspend To RAM) state. This item can be configured only if
the item "ACPI Suspend Type" is set to [S3(STR)].
Power Button Function
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the
system. This will prevent the system from powering off in case you accidentally hit or
pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately
power off the system.
User's Manual