Advertisement
PRECAUTIONS FOR SAFETY
• Do not install, repair, open or remove the cover. It may expose you to dangerous voltages. Ask the dealer or the specialist to do this.
• Turning off the power supply will not prevent potential electric shock.
DANGER
• The appliance shall be installed in accordance with national wiring regulation.
• Means for disconnection from the supply having a contact separation of at least 3 mm in all poles must be incorporated in the fixed wiring.
• Do not expose your body directly to cool air for a long time.
WARNING
• Do not insert your finger or any article into the air inlet/outlet.
• When an abnormality (burning smell, etc.) occurs, stop the air conditioner and disconnect the power supply or turn off the breaker.
• Do not wash the unit with water. It may cause an electric shock.
• Do not use this air conditioner for other purposes such as preserving food, breeding animal, etc.
• Do not step or put anything on the indoor/outdoor unit. It may cause an injury or damage the unit.
CAUTION
• Do not touch aluminium fin because it may cause an injury.
• Before cleaning the unit, turn off the main switch or the circuit breaker.
• When the unit won't be used for a long time, turn off the main switch or the circuit breaker.
• It is recommended that maintenance be performed by a specialist when the unit has been operated for a long time.
INDOOR UNIT DISPLAY
1
Model: 42NQV025, 035, 045H, 42NQV035, 045M
1
2
3
4
8
7
Model: 42NQV025M
3
2
1
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the accessory sheet).
Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push
by tip of the pencil.
2. Press
or
: adjust the time.
ON
OFF
3. Press
: Set the time.
Remote Control Reset
1. Remove the battery.
2. Press
.
3. Insert the battery.
AIRFLOW DIRECTION
3
Press
: Move the louver in the
1
desired vertical direction.
Press
: Swing the air
2
automatically and press again to stop.
For horizontal direction, adjust
3
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by come operation mode.
1110250114.indd 2
1 Hi POWER (Green)
5
2 FILTER (Orange)
3 DE-FROST (Orange)
4 TIMER (Yellow)
5 OPERATION (Green)
6 RESET button
7 TEMPERATURE display
6
(42NQV025, 035, 045H Only)
8 NIGHT LIGHT
(42NQV025, 035, 045H Only)
1 OPERATION (Green)
2 TIMER (Yellow)
3 RESET button
REMOTE CONTROL
4
1 Infrared signal emitter
2 Start/Stop button (
)
3 Mode select button (
)
4 Temperature button (
)
5 Fan speed button (
)
6 Swing louver button (
)
7 Set louver button (
)
ON
OFF
ON
OFF
8 On timer button (
)
ON
OFF
ON
OFF
ON
OFF
9 Off timer button (
)
ON
OFF
ON
OFF
! Sleep timer button (
)
ON
OFF
" Setup button (
)
ON
OFF
# Clear button (
)
$ Memory and Preset button (
ON
OFF
)
% Night light button (
)
(42NQV025, 035, 045H Only)
& High power button (
)
ON
OFF
( Economy button (
)
ON
OFF
) Filter reset button (
)
ON
OFF
ON
OFF
~ Clock Reset button (
)
ON
OFF
+ Check button (
)
ON
OFF
ON
Note: Some models, remote will have text
above the buttons.
NIGHT LIGHT
5
(42NQV025, 035, 045H Only)
Carrier's night light feature has been developed to provide you with a safe &
secure lighting solution at almost no cost. This selectable light provides a dim/
unobtrusive light that can increase safety & security for all, but particularly children
or the aged. The night light button turns this feature on/off and it operates with less
than 10% of the cost of a normal 25w light bulb.
Press
: on/off lamp.
AUTOMATIC OPERATION
6
To automatically select cooling, heating, or fan only operation
1. Press
: Select A.
2. Press
: Set the desired temperature.
COOLING / HEATING / FAN ONLY OPERATION
7
1. Press
: Select Cool
, Heat
2. Press
: Set the desired temperature.
Cooling: Min. 17
C, Heating: Max. 30
o
3. Press
: Select AUTO, LOW , LOW+
or HIGH
.
DRY OPERATION (COOLING ONLY)
8
For dehumidification, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry
.
2. Press
: Set the desired temperature.
1
$
%
2
6
7
8
ON
OFF
!
+
)
OFF
, or Fan only
.
C, Fan Only: No temperature indication
o
, MED
, MED+
,
2/16/07 10:28:20 AM
5
4
3
&
(
#
9
"
~
Advertisement
