10. Camera; Taking Pictures; Creating Your Picture Messaging Password - Sanyo SCP-8100 User Manual

Hide thumbs Also See for SCP-8100:
Table of Contents

Advertisement

10. Camera

Taking Pictures

Taking pictures with your phone's built-in camera is as simple as
choosing a subject, pointing the lens, and pressing a key. You
can activate Camera mode and take pictures whether the phone
is open or closed.
To Take a Picture With the Phone Open:
1. Press
to access the main menu.
2. Highlight Pictures and press
3. Highlight Camera and press
(Additional user options are available through the Camera
mode Options menu. See "Camera Mode Options" on page 92
for more information.)
Shortcut:
To activate Camera mode in another way, press and hold
press
twice, or just press the Side Camera key (see diagram on
page 2).
4. Using the phone's Main LCD as a viewfinder, aim the camera
lens at your subject.
5. Hold the camera steady. To take the picture, press
or the Side Camera key.
6. Press
(left softkey) to save the picture. Press
Keep
(right softkey) to erase the picture and return to Camera mode.
Once you have kept/saved a picture, you will be in
Review/Share mode. You will now be able to share or upload
the picture.
To return to Camera mode to take another picture, press
To Take a Picture With the Phone Closed:
1. Press and hold the Side Camera key to activate Camera mode.
2. Point the camera lens at your subject. You can check the
picture framing through the Sub LCD.
Note:
When taking a picture with the phone closed, the subject image
appears in reverse on the Sub LCD. When you take a picture, it will be
saved correctly, that is, not reversed.
to access the Pictures menu.
to activate Camera mode.
,
,
Discard
.
3. Press the Side Camera key to take the picture.
4. Press the Side Camera key to save the picture.
Note:
The picture will be saved automatically after 30 seconds.
Note:
While you are taking a picture, the backlight turns on even if your
Always Off
backlight is set to
.
Note:
In some cases, the screen may flicker and the stripes may appear
on the display under fluorescent lighting.

Creating Your Picture Messaging Password

The first time you use any of the Picture Messaging management
options involving the Picture Messaging website you will need
to establish a Picture Messaging password through your phone.
This password will also allow you to log in to the Picture
Messaging website at
www.bell.ca/mypictures
manage your uploaded pictures.
To create your Picture Messaging password:
1. Press
to access the main menu.
2. Highlight Pictures and press
3. Highlight Review/Share and press
Shortcut:
Instead of steps 3 above, highlight
Then press
(left softkey) to enter Review/Share mode.
Review
4. Press
(right softkey), highlight Upload, and press
Options
5. Highlight Upload This or Upload All and press
prompted to create a Picture Messaging password.
Note:
To access Picture Messaging website in another way,
Online Pics
highlight
and press
6. Enter a 4-digit, alpha-numeric password and press
Tip:
Write down your Picture Messaging password in a secure place.
7. Please wait while the system creates your account.
Once you have received confirmation that your account has
been successfully registered you may upload and share pictures
and access the Picture Messaging website.
to access and
.
.
Camera
and press
.
.
. You will be
from step 3 above.
.

Advertisement

Table of Contents
loading

Table of Contents