Installing the LabelWriter Print Server
This chapter describes how to install and configure the print server.
To install the print server
1
2
3
4
5
Getting Started
Once you have unpacked your print server, make sure that you have all of the items shown here.
In addition to the items that come with the print server, you will need the following:
•
•
•
•
Make sure that you have everything you need to get started.
Connect the cables.
Install the LabelWriter Control Center software.
Configure the print server.
Add the printer to your computer.
See Chapter 3, Adding a Printer for instructions on adding a printer on your specific
operating system.
CD-ROM
LabelWriter Print Server
A LabelWriter 400 or later series printer, with power adapter and USB cable
Installed LabelWriter printer drivers (included in the DYMO Label Software installation)
A standard Ethernet cable (available from your local office supply and other retailers)
A working Ethernet connection to your Local Area Network
POWER
LINK
ACTIVE
USB
Chapter 2
Power adapter
3