Table of Contents
Advertisement
Description of the Appliance
Control Panel
A. Temperature adjustment button/thermostat
Used to set the temperature in the freezer.
B. Fast freezing button / Reset button for audible
alarm.
C. Freezer power switch
Switches the freezer on and off.
Before use
Position and clean the cabinet as explained in the
section "Installation".
Using the freezer
To start the freezer and set the
correct temperature
Starting
Set the power switch to "ON".
The alarm sounds if the temperature inside the
freezer reaches room temperature. Turn off the alarm
by pressing the switch-off button.
To sett the temperature:
Turn the thermostat control to the desired position.
Switching on:
Turn the control past the "1" position.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be
sure that the temperature inside the freezer is -18°C
or below. Please note, however, that the energy
consumption increases as the temperature decreases.
MIN
MAX
A
B
1
0
C
D. Yellow indicator lamp
Lights when Fast Freeze is operating.
E. Green indicator lamp / Red warning lamp
Lights in green when the temperature in the freezer
is normal. Blinks in red when the audible alarm of
the freezer has triggered.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
3
D
MIN
MAX
Electrolux 818 21 30-00/8
GB
E
GB
GB
Advertisement
Table of Contents
