Remote Lock Function; Disabling The Sensor Function Of The Remote Control Unit; Enabling The Remote Sensor Function; Settings - Marantz NR1504 Owner's Manual

Contents

Remote lock function

When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
M-DAX
X
PRESET CH –
Front panel Display
Connections Playback
DISPLAY STATUS
PRESET CH +
Rear panel

Settings

Disabling the sensor function of the
remote control unit
1
When the main unit is in standby mode, press X while
holding down M-DAX and DISPLAY on the main unit.
2
Press PRESET CH + or PRESET CH – to select "RC LOCK
On".
3
Press STATUS to enter the setting.
The infrared light receiving function is disabled.

Enabling the remote sensor function

1
When the main unit is in standby mode, press X while
holding down M-DAX and DISPLAY on the main unit.
2
Press PRESET CH + or PRESET CH – to select "RC LOCK
zOff".
(z The currently set mode.)
3
Press STATUS to enter the setting.
The infrared light receiving function on the main unit is enabled.
111
Remote
Tips Appendix
Index