Authorization Code; Voice First/Tone First; Originating A Voice Call; Answer A Voice Call Hands Free - NEC UNIVERGE DT310 User Manual

Authorization Code

To enter without account code
Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set
tone.
Enter "Authorization Code" (up to 16 digits).
Receive dial tone, dial desired number.

Voice First/Tone First

Allows incoming station calls to your Dterm to either
ring or go to voice announcement.
Press Speaker key. Receive dial tone.
Dial Voice/Tone access code, LED display shows
current mode receives feature dial tone.
4:26 PM TUE 12 FEB 2008
Press *, LED display shows mode change, receive
feature set tone.
4:26 PM
Note:
Each time * is pressed, you alternate between
TONE and VOICE.
VOICE
TONE
TUE 12 FEB 2008

Originating a Voice Call

Lift handset.
Dial desired station number.
Press Voice or press 1.
VCL
4:26 PM
Speak to called party.

Answer a Voice Call Hands Free

Receive incoming Voice Call.
Press the MIC Key. LED lights.
Respond hands-free.
Note:
If privacy is required, lift handset.
26
2000
TUE 12 APR 2008