Fabric Manager Configuration; Automatically Starting The Fabric Manager - Qlogic 12000 User Manual

A
1. From the OOB LAN IP submenu, click Set Default Gateway IP.
Figure 1-81 Set Switch Default Gateway IP Address Button
2. Click in the OOB IP Address field.
3. Type in the correct switch default gateway IP address.
4. Click Apply.
NOTE:A reboot is required to activate the new gateway IP address.
NOTE:If the DHCP option is selected, no gateway address is necessary.

Fabric Manager Configuration

NOTE:

Automatically starting the Fabric Manager

To enable the Fabric Manager to automatically start at boot time:
1. From the menu, click Subnet Manager.
2. Click Configuration. The Subnet Manager Configuration window is displayed:
D000101-000
Figure 1-82 Set Default Gateway IP Window
This section assumes the user has purchased and activated the
embedded version of the Fabric Manager
Figure 1-83 Subnet Manager Submenu
Operations and Administration
Configuration and Monitoring Features
.
1-53