Abit BX6 User Manual page 34

3-12
or crash if the system speed is too high. In that case, you should Disable this
feature.
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache. When the
external cache is enabled, the system works faster. The default is Enable.
CPU Level 2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC checking
function.
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard will
run a series of tests in order to check the system and its peripherals. If the
Quick power on self test feature is Enable, the BIOS will simplify the test
procedures in order to speed up the boot process. The default is Enable.
Boot Sequence:
When the computer boots up, it can load the operating system from floppy
drive A:, hard disk drive C:, SCSI disk drive or CD-ROM. There are many
options for the boot sequence:
ä A, C, SCSI
ä C, A, SCSI
ä C, CD-ROM, A
ä CD-ROM, C, A
ä D, A, SCSI ( At least 2 IDE HDD can be used )
ä E, A, SCSI ( At least 3 IDE HDD can be used )
ä F, A, SCSI ( At least 4 IDE HDD can be used )
ä SCSI, A, C
ä SCSI, C, A
ä A, SCSI, C
ä LS/ZIP, C
Swap Floppy Drive:
This item can be set as Enable or Disable.
When this feature is enabled, you don't need to open the computer case to
swap the position of floppy disk drive connectors. Drive A: can be set as drive
Chapter 3