Table of Contents
Advertisement
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and time
settings before you begin recording.
1.
Press the Menu key
2.
Select Date / Time and press the OK key.
Use the ▲ and ▼ keys to adjust the value and press the OK key.
3.
4.
Repeat Step 3 until all fields have been changed.
Recording mode
Continuous recording
When you connect the car charger to the cigarette lighter in the car, the recorder will start
continuous recording automatically. The recording may be divided into several video clips;
recording will not stop between video clips.
The recorder automatically stops and saves the recording when the vehicle engine is shut down. If
you want to stop recording manually, press the ▼ key.
Note: If continuous recording is ongoing and when the card has run out of memory, new video clips will replace
the old ones.
"Emergency" recording
By default, if an event happens, such as sudden impact, high-speed driving, an overturn or an
accidental crash, the G sensor will prompt the recorder to start an "Emergency" recording.
The "Emergency" recording means to record 1 file instead of several video clips.
To manually start an "Emergency" recording while normal recording, press the OK key.
6
to access the Settings menu.
Advertisement
Table of Contents
