Cw314L; Back Focus Setting [Back-Focus Setup]; Cw324L Cw304L; Cw324L Cw314L Cf314L - Panasonic WV-CW324LE Series Operating Instructions Manual

Back focus setting [BACK-FOCUS SETUP]

Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the "BACK-FOCUS
SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment shall be performed before the back focus adjustment.
"BACK-FOCUS SETUP" screen
**BACK-FOCUS SETUP**
ABF PUSH SET
MANUAL-ADJ
C/L B/W FIX
RET TOP END

16. Auto back focus setting [ABF]

Move the cursor to "→ PUSH SET" of "ABF" and press the [SET] button.
→ The auto back focus function provides back focus adjustment to automatically focus on a subject located in the center of the
screen.

17. Manual back focus setting [MANUAL-ADJ]

To fine adjust the back focus, move the cursor to "MANUAL-ADJ", press the [SET] button, and press the [RIGHT] or [LEFT] button to
adjust the back focus manually.
18. Auto back focus settings for switching between color and black-and-white
modes [CL↔B/W]
Move the cursor to "C/L← →B/W" and select the back focus adjustment type from the following:
AUTO: Adjusts the back focus function automatically and corrects out of focus when switching between color and black-and-white
images.
FIX (default): The back focus function will not adjust automatically when switching between color and black-and-white images.
Important:
• The auto back focus function is used for back focus adjustment at installation and for focus correction at switching between the
color and black-and-white modes after installation. This function is not a function that is supposed to be operated continuously
such as the auto focus function.
• When focus missing occurs due to secular change in the lens and installation environment or peripheral temperature change, the
back focus adjustment is required again.
• The following are recommendation for back focus setting in accordance with subjects.
For such case (subject conditions)
• Normal subject
• Frequently moving subject
• Subject with remarkable illuminance change
• Subject with low illuminance
• Too bright or reflective subject
• Subject through a window
• Place where the lens easily becomes dirty
• Subject with less contrast such as white wall
• Subject with remarkable depth
• Subject with heavy flicker
• Subject with horizontally parallel lines such as a shutter
Note:
• The back focus adjustment can be also performed through the operation buttons.
24
Select this (recommendation)
Back focus adjustment
"ABF"
Fine adjustment with "MANUAL-ADJ" after
"ABF"

CW314L

CW324L CW304L
CW324L CW314L CF314L
CW314L CW304L CF304L
CW304L CF314L
CF314L CF304L
CF304L
"C/L← →B/W" switching
"AUTO"
"FIX"