Connecting The Power Cables - Yamaha RDX-E700 Owner's Manual

CONNECTING EXTERNAL COMPONENTS
■ About the AUX jacks
• The signal input from the AUX IN jack is not output
from the AUX OUT jack.
• The DVD receiver's digital and analog signal circuits
are independent of each other. Analog input signals are
output only from analog output jacks.
■ About the DIGITAL jack
• The digital jack is compatible with PCM, Dolby
Digital and DTS signals.
• The digital jack is designed based on EIA standards.
To make a digital connection, use an optical cable that
meets EIA standards.
y
This unit can output a DTS signal digitally. To reproduce a DTS
encoded source, connect the DIGITAL OPTICAL OUT jack on
the DVD receiver to the digital input jack on a component that
features a DTS decoder.
12

Connecting the Power Cables

After you made all connections, connect the power cables
of the DVD receiver and subwoofer (optional).
To an AC wall outlet
R L
6Ω MIN. /SPEAKER
CLASS 2 WIRING
SUB WOOFER
SPEAKERS
OUT
(U.S.A. and Canada models)