GE Monogram ZET1 Owner's Manual page 40

Care and Cleaning
Wall Ov_,_
7b clean
the door
Inside of the door:
* Because the area inside the gasket is cleaned
during the self'clean cycle, you do not need to
clean this by hand. Any soap left on the liner
causes additional stains when the oven is
heated, so be sure to vh_se thoroughly.
* The area outside the gasket can be cleaned
with a soap-filled scouring pad.
" Do not rub or clean the door gasket--
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential
fl)r energDetticient oven operation and good
baking results. If wm notice the gasket
becoming worn, fl'ayed or damaged in
any way or if it has become displaced on
the oven, you should have it replaced.
Outside of the door:
'_ Del)ending, on }(mr model, see the 5"tainle,s,s
,steel ,slff_?l_ e,s section or the Pai_ted ,slff_h_ e,s
section.
@
Stainless steel
su #ces (on
some models)
Do not use a steel-wool pad; it will scratch the
surface.
To clean the stainless steel surfitce, use
warm sudsy water or a stainless steel cleaner or
polish. _Mways wipe the surfime in the direction
of the grain. Follow the cleaner instructions flw
cleaning the stainless steel surthce.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
tollfree number, 800.626.2002 or visit ge.com.
Painted
s_tgrfaces
(on so_z€
modeS)
Painted surfitces include the doo,; top
of the control panel and the drawer f_'ont.
Clean these with soap and water or a vinegar
and water solution.
Do llOt use coi/n/lercial o_,ell cleaIlers, clealliIlO
powders, steel wool or harsh abrasives
011 all}
painted sm'thce.
40