Attach Foam Strips; Locate Mounting Parts; Attach Brackets To Cooktop; Insert The Cooktop Into Cutout - GE Monogram ZEU30R Installation Instructions Manual

Attach
Apply the foam strips around the outer edge
of the glass. Do not overlap the foam strips
Foam Strips
Locate
Remove the hold down brackets and
screws from the literature package.
Mounting
Parts
Attach
Screw the Hold Down Bracket to the side of
Brackets to the cooktop unit. Repeat for opposite side
of cooktop.
Cooktop
Insert
Insert the cooktop centered into the
cutout opening. Make sure the front
Cooktop
edge of the countertop is parallel to
Into
the cooktop. Make final check that all
Cutout
required clearances are met.
!
must be made before putting the cooktop
into the cutout opening.
Attach
Open the cabinet door and screw the Hold
Hold Down
Down Brackets to the cabinet sides with the
Brackets to
screws provided.
Cabinet
6
IMPORTANT: If the cooktop
is being installed into a blind
counter (one with no cabinet
opening below), wire connections
Installation
Electronic Radiant Cooktop
Bottom of
Cooktop
.
Cooktop
Glass
MOUNTING
SCREW
Bottom of
Cooktop
Cooktop
Glass
COOKTOP
Hold
Down
Bracket
MOUNTING
SCREW
CABINET
SIDE
Foam Strips
Pre-drilled
hole
Foam Strips
BURNER BOX
SIDES
USE SUITABLE
FASTENERS FOR
ANCHORAGE IN
CABINET SIDES