Cub Cadet GT 2554 Operator's Manual page 34

2500 series
Hide thumbs Also See for GT 2554:
Table of Contents

Advertisement

NOTE
If installing the deck on a new tractor, cut the
cable tie used to hold the front lift rod up during
shipment. Then proceed to step 8.
6. Refer to Figure 30 to ensure the correct
orientation of the front lift rod/bracket assembly
[the form (bend) in sides of rod point downward].
From the front of the tractor, push downward and
hold the tractor quick-attach rod. Slide the
shoulder bolts on each side of the front lift rod/
bracket assembly fully into the left and right
tractor latch receivers.
QUICK
ATTACH
ROD
SHOULDER BOLT
(BOTH SIDES)
FRONT LIFT
ROD/BRACKET
ASSEMBLY
Figure 30
7. Release the tractor quick-attach rod to capture
the front lift rod/bracket assembly in the tractor
latch receivers (See Figure 31).
QUICK ATTACH ROD
CAPTURED LIFT ROD/
BRACKET ASSEMBLY
Figure 31
TRACTOR
LATCH RECEIVER
(BOTH SIDES)
FORM
8. While holding the front lift rod up, slide the mower
deck forward until the rod aligns with both front
roller bracket slots. Lower the lift rod into the front
roller bracket slots and slide the deck rearward to
engage the lift rod fully forward in the slots of the
deck front roller bracket (See Figure 32).
9. If not already done, pull the deck support pins
outward, turn downward and relesase so both
spring-loaded pins are held in the disengaged
position against the outer surface of the deck
brackets (See Figure 33).
IMPLEMENT
LIFT LINKS
10. Carefully guide the tractor implement lift links (left
and right) into the rear deck bracket slots (left and
right) as the tractor implement lift handle is
lowered to its lowest setting (Refer to Figure 34).
11. Pull both deck support pins outward and rotate
rearward to disengage the outer surface of the
rear deck brackets. Release the pins, making
certain each deck support pin passes through the
inner hole of the rear deck bracket. The spring
tension will push the pins inward and, if aligned,
through the hole in each implement lift link (Refer
to Figure 34).
34
FRONT ROLLER
BRACKET
FRONT
LIFT ROD
Figure 32
REAR DECK
BRACKET SLOTS
DECK SUPPORT
PIN DISENGAGED
Figure 33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents