Specifications - GE Z-Wave 45603 User Manual

Important Note: To comply with the FCC RF exposure
compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure
requirements and void user's authority to operate the device.
Compliance with IC Rules and Regulations
IC: 6924A-45602A3
Jasco Products Company
Model: 45603
ZW4101
This Class B digital device complies with Canadian ICES-003.

SPECIFICATIONS

Power 120VAC, 60Hz
Signal (Frequency) 908.42 MHz
Maximum load for both outlets 15 Amps, 1800W Resistive
Maximum load for the Z-Wave controlled outlet: 600W
Incandescent, ½ HP Motor or 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless
Controller and the closest Z-Wave receiver module.
Operating Temperature Range: 32-104° F (0-40° C)
For indoor use only.
Specifications subject to change without notice due to
continuing product improvement
Z-Wave is a registered US trademark of Zensys A/S
© 2009 JASCO Products Company