Digital Audio Out; Dolby Digital Comp; Samsung Audio Device Connection - Samsung LED 7000 series E-Manual

Digital Audio Out

Screen Menu > Sound
This SMART TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio
output to speakers and various digital devices, including A/V Receivers and home theatres. This feature
reduces interference and distortion.
Audio Format
●
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF)
formats may vary depending on the input source.
Audio Delay
●
This setting helps correct timing mismatches between the audio and video tracks when watching
TV and listening to audio through a digital audio device. Enabling the feature displays a slide bar
that you can use to adjust the delay by up to 250ms.

Dolby Digital Comp

Screen Menu > Sound
Some digital TV programmes provide 5.1-channel Dolby audio. This TV converts Dolby audio to stereo
audio so that it can play the sound through the TV's speakers. There are two methods to choose from.
RF
is for better sound at lower volumes, and

Samsung Audio Device Connection

Screen Menu > Sound
Connect the TV to a Samsung audio device for a richer, clearer sound. This function is available for
Samsung Audio Device supported the SoundShare function. Pair the Samsung audio device using the
TV's Bluetooth function. Refer to the Samsung audio device's operating manual for more information
on pairing.
Add New Device
●
Enables/disables SoundShare. Connection signals from New Devices are ignored if they are set to
Off.
Samsung Audio Device List
●
Displays a list of paired Samsung audio devices. Select a device to display its menu options.
Activate/deactivate the audio device or remove it from the list.
"
When using a Bluetooth audio device, a slight mismatch between the audio and video may occur,
depending on the content.
Additional Settings
>
Additional Settings
>
Speaker Settings
>
Digital Audio Out
>
Dolby Digital Comp
>
Line
is for higher volumes.
SoundShare Settings
>
Try Now
Try Now