Connect Your Tv (For Tv Audio) - Pioneer HTP-700 Operating Instructions Manual

Connecting up

Connect your TV (For TV audio)

This will allow you to play the sound from the TV's built-in tuner.
• Connect the analog audio outputs from
your TV to the TV/SAT inputs on this system.
Use a stereo RCA phono cable.
• If your TV has a built-in digital decoder, you
can also connect an optical digital audio
output from your TV to the DIGITAL
OPTICAL IN 2 (AUX) input on this system.
Use an optical cable for the connection.
Note
1 In this case, you'll need to tell the system which digital input you connected the TV to (see Choosing the input signal
on page 48).
TV
Select one
AUDIO OUT
DIGITAL OUT
ANALOG
R L OPTICAL
1 2
1
1
02
29
En