General Setup; Important Note; Memory Storage; Volume Settings (Mfc Models) - Brother MFC-J450DW User Manual

1

General setup

IMPORTANT NOTE

Most of the illustrations in this User's Guide show the MFC-J470DW.


Memory Storage

Your menu settings are stored permanently,
and, in the event of a power failure, will not be
lost. Temporary settings (for example,
Overseas Mode) will be lost. If you have
chosen Set New Default for your
1
preferred FAX and COPY settings, those
settings will not be lost. However, you may
have to reset the date and time.
1
MFC models only
Volume Settings
1
(MFC models)

Ring Volume

You can choose a range of ring volume
levels, from High to Off. The machine will
keep your new default setting until you
change it.
While the machine is idle, press
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level.
You can also change the volume through the
menu by following the instructions below:
Setting the Ring Volume from the
menu
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
Press OK.
e
Press a or b to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
1
1
1
1
1
d or c
1
1