Kawai KDP90 Owner's Manual page 46

4. Connecting the pedal cable and
AC/DC adaptor
Connect the pedal cable to the PEDAL terminal located on the
underside of the main body.
Connect the AC/DC adaptor e to the DC IN terminal.
Use the binders to fi x the cables in place.
5. Attaching the headphone hook (optional)
If desired, attach the headphone hook to the underside of the
main body using the two tapping screws provided.
j
b
46
Binder
* Note the direction
a
6. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise until it makes
contact with the fl oor and supports the pedals fi rmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.