Splitting The Keyboard - Kawai Concert Performer CP139 Quick Start Manual

Splitting the keyboard

When the LEFT/SPLIT Part is activated, the CP automatically splits the keyboard and only the sound assigned to
the LEFT/SPLIT Part will be heard when you play below a specified key (split point) on the keyboard. The default
split point is between F2 and F#2 but you can freely change the split point to any key on the keyboard.
To change the split point:
Step 1
Press the LEFT/SPLIT button to activate the LEFT/SPLIT Part.
The LEFT/SPLIT button LED will light and the LCD screen will display a diagram of the CP's 88 note keyboard.
Step 2
Press and hold the LEFT/SPLIT button, then press the desired key on the keyboard that you want to serve
as the split point.
The key you press will become the lowest note the Right hand Parts will play (RIGHT1, RIGHT2, and SOLO). The
LEFT/SPLIT sound will be heard when keys below the split point are played.
Step 3
The split point for the LEFT/SPLIT part can also be set from the PERFORMANCE button menu. You may
also touch the and arrows either side of the keyboard diagram to move the split point.
On the LCD screen the split point marker will move across the 88 note keyboard diagram as you press these
buttons.
arrow: Lowers the split point.
Moving the split point completely to the LEFT end of the keyboard will allow the LEFT/SPLIT Part to function as a layer
with the three right hand Parts. In this manner you can create a four part layer across the entire keyboard.
The split-point for the SOLO part cannot be raised or lowered by touching the onscreen
arrow: Raises the split point.
and arrows.
Page
23
3