Kawai Classic Series CS6 Owner's Manual

Digital
Hide thumbs Also See for Classic Series CS6:
Table of Contents

Advertisement

Quick Links

Preparation Before Use
Playing the Piano
Music Menu
CS6
Recorder
Owner's Manual
Settings
Appendix

Advertisement

Table of Contents
loading

Summary of Contents for Kawai Classic Series CS6

  • Page 1 Preparation Before Use Playing the Piano Music Menu Recorder Owner’s Manual Settings Appendix...
  • Page 2 Thank you for purchasing this Kawai Classic Series digital piano. This owner’s manual contains important information regarding the usage and operation of the CS6 digital piano. Please read all sections carefully, keeping this manual handy for future reference.
  • Page 3: Preface

    Ultra Progressive Harmonic Imaging (UPHI) with 88-key piano sampling This CS6 digital piano captures the beautiful sound of Kawai’s highly acclaimed hand-built concert grand piano, with all 88 keys of this exceptional instrument meticulously recorded, analysed and faithfully reproduced using proprietary Ultra Progressive Harmonic Imaging™...
  • Page 4: Important Safety Instructions

    Important Safety Instructions Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT RISK OF ELECTRIC SHOCK EXPOSE THIS PRODUCT TO DO NOT OPEN RAIN OR MOISTURE.
  • Page 5 WARNING - When using electric products, basic precautions should always be followed, including the following. WARNING Indicates a potential hazard that could result in death or serious injury if the product is handled incorrectly. The product should be connected to If you are going to use an AC power cord, 120V 230V...
  • Page 6 Indicates a potential hazard that could result in injury or CAUTION damage to the product or other property if the product is handled incorrectly. Do not use the product in the following areas. Using the product in such areas may result in product breakdown.
  • Page 7 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This applies only to products distributed by Kawai America Corporation.
  • Page 8: Table Of Contents

    Table of Contents Preface Concert Magic ..........3 .
  • Page 9 section Virtual Technician Appendix ....... . .54 1 Touch ......... 55 Troubleshooting .
  • Page 10: Preparation Before Use

    Preparation Before Use Part Names and Functions Kawai CS6 Classic Series...
  • Page 11: Lcd Display

    section a POWER switch k METRONOME button This switch is used to turn the CS6 digital piano on/off. This button is used to turn the metronome function on/off, Be sure to turn off the instrument after playing. and also to adjust the tempo, time signature (or beat), and volume settings.
  • Page 12: Setting Up The Piano

    Setting Up the Piano 1. Connecting the power cable to the instrument 2. Connecting the power cable to an outlet Connect the included power cable to the ‘AC IN’ inlet located Connect the instrument’s power cable to an AC outlet. on the back side of instrument.
  • Page 13: Adjusting The Volume / Using Headphones

    Adjusting the Volume / Using Headphones Adjusting the volume The MASTER VOLUME slider controls the volume level of the instrument’s speakers, or headphones if connected. Move the slider up to increase the volume, and down to decrease the volume. Use this slider to set the volume to a comfortable listening Increase Increase level - the middle is often a good starting point.
  • Page 14: Playing The Piano

    Playing the Piano Selecting Sounds The CS6 digital piano features a wide selection of realistic instrument sounds suitable for various musical styles. Sounds are arranged into eight categories, with several sounds assigned to each category button. For a complete listing of sounds available on the CS6 instrument, please refer to page 86 of this owner’s manual.
  • Page 15: Using The Pedals

    Using the Pedals As with a grand piano, the CS6 digital piano features three pedals: sustain, sostenuto, and soft. Soft pedal Soft pedal Sostenuto pedal Sostenuto pedal Sustain pedal Sustain pedal Sustain pedal (right pedal) Sostenuto pedal (centre pedal) Depressing this pedal sustains the sound after one’s hands Depressing this pedal after playing the keyboard and before have been lifted from the keyboard - greatly enriching the releasing the keys, sustains the sound of only those notes that...
  • Page 16: Reverb

    Reverb Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. The CS6 digital piano features five different reverb types. Reverb types Reverb type Description Room 1 Simulates the ambiance of a living room or small rehearsal room. Room 2 Simulates a larger room than Room 1.
  • Page 17: Effects

    Effects In addition to reverb, various other effects can be applied to the selected sound, altering the tonal character and feeling of the instrument. The CS6 digital piano features seven effect types. Effect types Effect type Description Simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version of Chorus the selected sound over the original, thus enriching the tonal character.
  • Page 18: Adjusting Effect Settings

    Adjusting Effect Settings It is also possible to adjust settings for each effect, further altering the tonal character of the selected sound. Effect settings and explanation Effect type Adjustable settings Explanation Depth Adjusts the depth (strength) of the Chorus effect. Chorus Speed Adjusts the speed of the Chorus effect.
  • Page 19: Dual Mode

    Dual Mode The Dual Mode function allows two sounds to be layered together, creating a more complex sound. For example, a piano sound layered with strings, or an electric piano combined with a choir, etc. Entering dual mode Press and hold a SOUND SELECT button, then press another SOUND SELECT button.
  • Page 20: Split Mode

    Split Mode The Split Mode function divides the keyboard into two sections, allowing each section to be played with a different sound. For example, a bass sound in the lower section, and a piano sound in the upper section. Entering split mode Press the SPLIT button.
  • Page 21: Four Hands Mode

    Four Hands Mode The Four Hands Mode function divides the keyboard into two sections in a similar way to that of the Split Mode function. However, the octave/pitch of each section is also adjusted, while the sustain (right) pedal and soft (left) pedal act as separate sustain pedals for the upper and lower sections respectively.
  • Page 22: Metronome / Drum Rhythms

    Metronome / Drum Rhythms The Metronome function provides a steady beat to aid practicing the piano at a consistent tempo. In addition to regular metronome beats, the CS6 digital piano also features a variety of drum rhythms to accompany most playing styles and musical genres.
  • Page 23: Registration Memories

    Registration Memories The Registration function allows the current instrument setup (sound selections, split point, reverb and effect settings, and various other panel options) to be stored in one of eight registration memories, and conveniently recalled at the touch of a button. Settings stored in registration memories Sound settings Tone settings...
  • Page 24: Music Menu

    Music Menu Demo Songs The Demo function provides an excellent introduction to the varied capabilities of CS6 digital piano. There are 36 different demonstration songs available, highlighting the instruments’ rich selection of high quality sounds and its power speaker system. For a complete listing of demonstration songs, please refer to page 87 of this owner’s manual.
  • Page 25: Piano Music

    Piano Music In addition to the sound demonstration songs, the CS6 digital piano also features a selection of popular classical piano works from the Baroque and Romantic periods. Notated scores are provided in the separate ‘Classical Piano Collection’ book*, assisting the musical appreciation and study of each piece. For a complete listing of Piano Music pieces, please refer to the separate ‘Internal Song Lists’...
  • Page 26: Lesson Function

    Lesson Function The Lesson function allows budding pianists to practice the piano using a selection of built-in song books and finger exercises. The left and right hand parts of each piece can be practiced separately, adjusting the tempo to perfect difficult passages, before being recorded for self-evaluation. Built-in lesson mode song books US, Canada, UK, Australasia Rest of the World...
  • Page 27: Listening To The Selected Lesson Song

    section Listening to the selected lesson song This page will explain how to play and stop the selected lesson song, and adjust the tempo. Playing the lesson song After selecting a lesson book and song: Press the PLAY/STOP button. The LED indicator for the PLAY/STOP button will turn on, and a one bar count-in will be heard before the song starts to play.
  • Page 28: Practicing Left And Right-Hand Parts Separately

    Lesson Function Practicing left and right-hand parts separately This page will explain how to adjust the left and right-hand part volume of the selected lesson song (allowing each part to be practiced separately), and how to start playing a lesson song from a specific bar. Adjusting the left/right-hand part volume After selecting a lesson book and song: Adjust the volume of the right-hand part...
  • Page 29: Repeating Sections Of A Lesson Song

    Repeating sections of a lesson song This page will explain how to repeat (loop) specific sections of the selected lesson song between a defined ‘A’ and ‘B’ point, allowing difficult passages to be practiced continuously. 1. Specifying the start point (A) of the loop After selecting a lesson book and song: Press the PLAY/STOP button.
  • Page 30: Recording A Lesson Song Practice

    Lesson Function Recording a lesson song practice This page will explain how to record the left or right-hand parts of the selected lesson song, then play back the performance for self-evaluation. 1. Starting the lesson song recording After selecting a lesson book and song: Press the REC button.
  • Page 31: Finger Exercises

    Finger Exercises The lesson function also includes a selection of finger exercises for practicing major and minor scales, arpeggios, chords, cadences, and Hanon exercises, with notated scores provided in the separate ‘Finger Exercises’ book. The CS6 digital piano can also evaluate one’s practice, analysing note accuracy, timing evenness, and note volume consistency, before displaying results for each category.
  • Page 32: Concert Magic

    Concert Magic The Concert Magic function allows complete beginners to enjoy playing the piano by simply selecting one of the 176 pre-programmed songs, then tapping the keyboard with a steady rhythm and tempo. For a complete listing of available Concert Magic songs, please refer to the separate ‘Internal Song Lists’ booklet. Performing a Concert Magic song The 176 Concert Magic songs are divided into banks ‘A’...
  • Page 33: Concert Magic Demo Mode

    section Concert Magic demo mode This function allows all of the Concert Magic songs to be played back randomly or in designated categories. Random playback Enter Concert Magic mode and select the desired song. Press the PLAY/STOP button. All 176 Concert Magic songs will be played in a random order until the PLAT/STOP button is pressed.
  • Page 34: Concert Magic Song Arrangement Types

    Concert Magic Concert Magic song arrangement types Concert Magic songs are divided into three different arrangement types, each requiring a different level of skill to be performed correctly. Easy Beat These are the easiest songs to play. To perform them, simply tap out a constant steady beat on any key on the keyboard. Look at the following example for ‘Für Elise’.
  • Page 35: Steady Beat Mode

    Skillful These songs range in difficulty from moderately difficult to difficult. To perform them, tap out the rhythm of both the melody and the accompaniment notes on any key of the keyboard. The Note Navigator will be very helpful with the Skillful type songs. The song ‘Waltz of the Flowers’...
  • Page 36: Recorder

    Recorder Song Recorder (Internal memory) The CS6 digital piano allows up to 10 different songs to be recorded, stored in internal memory, and played back at the touch of a button. Each song consists of two separate tracks - referred to as ‘parts’ - that can be recorded and played back independently.
  • Page 37: Starting The Song Recorder

    section 3. Starting the song recorder Press a key on the keyboard. The LED indicators for the REC and PLAY/STOP buttons will turn on, and recording will start. * Recording can also be started by pressing the PLAY/STOP button, allowing a rest period or empty bar to be inserted at the beginning of the song.
  • Page 38: Playing Back A Song

    Song Recorder (Internal memory) Playing back a song This function is used to playback recorder songs stored in internal memory. To playback a song/part immediately after recording, start this process from step 2. 1. Entering song play mode Press the PLAY/STOP button. The LED indicator for the PLAY/STOP button will turn on, and the Play Internal screen will appear with the currently selected song and part number shown in the LCD display.
  • Page 39: Erasing A Part/Song

    Erasing a part/song This function is used to erase recorder parts/songs that have been recorded incorrectly, or are simply no longer required. 1. Entering erase mode Press the PLAY/STOP and REC buttons simultaneously. The LED indicators for the PLAY/STOP and REC buttons will start to flash, and the Erase screen will appear with the currently selected song and part number shown in the LCD display.
  • Page 40: Audio Record/Playback (Usb Memory)

    Audio Record/Playback (USB memory) The CS6 digital piano is also capable of recording performances as digital audio - saving the data to a USB memory device in either MP3 or WAV format. This useful function allows professional quality recordings to be produced directly on the instrument - without the need for additional sound equipment - then emailed to friends and family, played back through an iPod, or edited and remixed further using an audio workstation.
  • Page 41 section 4. Stopping the audio recorder, saving to USB Press the PLAY/STOP button. The LED indicators for the PLAY/STOP and REC buttons will turn off, and recording will stop. A confirmation message will be shown in the LCD display, prompting to confirm the save operation. Save (Yes) Save (Yes) Save to USB?
  • Page 42: Playing An Audio File

    Audio Record/Playback (USB memory) The CS6 digital piano is also capable of playing MP3 and WAV audio files stored on a USB memory device directly through the instrument’s speaker system. This function is particularly useful when attempting to learn the chords or melody to a new piece, or to simply play along with one’s favorite song. Audio Player supported format specifications Audio format Specifications...
  • Page 43: Starting Audio File Playback

    File/folder listing screen An example of a typical file/folder listing screen is shown The topmost two entries shown in symbols are used to below. For the purpose of illustration, the visible height of the select a recorder song stored in internal memory (‘Play Internal’ screen has been extended.
  • Page 44: Playing A Song File

    Audio Record/Playback (USB memory) The CS6 digital piano also supports the playback of Standard MIDI File (SMF) song files stored on a USB memory device, allowing a vast selection of widely accessible music to be heard through the instrument’s exquisite Ultra Progressive Harmonic Imaging sound engine. Playing a song file 1.
  • Page 45: Converting A Song To An Audio File

    Converting a song to an audio file The CS6 digital piano allows recorder songs stored in internal memory to be played back and saved (converted) as an audio file to a USB device in either MP3 or WAV format. 1. Selecting a song After recording a song to internal memory: Select a song number Select a song number...
  • Page 46: Settings

    Settings Functions menus The Functions menus contain various options for adjusting the control operation and tonal characteristic of the CS6 digital piano. There are six different menus, each consisting of several different settings. Entering the Functions menus Press the FUNCTION button on the normal operation screen. The first functions menu (Basic Settings) will be shown in the LCD display.
  • Page 47: Basic Settings

    Basic Settings The Basic settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument. This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration. Basic Settings Page no. Setting name Explanation Default setting Key Transpose...
  • Page 48: Key Transpose

    Basic Settings Key Transpose The Key Transpose setting allows the pitch of the CS6 digital piano keyboard to be raised or lowered in semi- tone steps. This is particularly useful when accompanying instruments with different tones, or when a song learned in one key must be played in another key.
  • Page 49: Tone Control

    Tone Control The Tone Control setting allows the overall sound character of the CS6 digital piano to be adjusted to provide the best sound quality within the area that the instrument is located. There are five different preset EQ settings available, with an additional ‘User’...
  • Page 50: Speaker Volume

    Basic Settings Speaker Volume The Speaker Volume setting allows the maximum volume level of the instrument’s speaker output to be reduced, thus providing finer adjustment control over the master volume. This setting can also serve as a volume limiter, preventing the CS6 digital piano from being played too loudly in the home. * This setting does not affect the headphones or Line-out volume.
  • Page 51: Tuning

    Tuning The Tuning setting allows the overall pitch of the CS6 digital piano to be raised and lowered in 0.5 Hz steps, and may therefore prove useful when playing with other instruments. 1. Selecting the Tuning setting Enter the Basic Settings menu (page 47). 1-6 Tuning 1-6 Tuning = 440.0...
  • Page 52: Four Hands

    Basic Settings Four Hands The Four Hands setting provides an alternative method to enabling the Four Hands Mode function, and may prove useful in teaching environments or situations where the function should be enabled automatically every time the CS6 digital piano is turned on. When enabled, all Four Hands Mode control operations are identical to those explained on page 47.
  • Page 53: Factory Reset

    1. Selecting the User Memory function Enter the Basic Settings menu (page 47). 1-9 User Memory 1-9 User Memory Press the buttons to select the User Memory function. Save ≥Press REC Save ≥Press REC 2. Storing current settings to User Memory Press the REC button to confirm the save operation.
  • Page 54: Virtual Technician

    Virtual Technician An experienced piano technician is essential to fully realise the potential of a fine acoustic piano. In addition to meticulously tuning each note, the technician also performs numerous regulation and voicing adjustments that allow the instrument to truly sing. The Virtual Technician settings of the CS6 digital piano simulate these refinements digitally, allowing performers to shape various aspects of the instrument’s character to suit their personal preferences.
  • Page 55: Touch

    section Touch As with an acoustic piano, the CS6 digital piano produces a louder sound when the keys are struck with force, and a softer sound when the keys are played gently. The volume and tonal character change in relation to the strength and speed of playing - on a digital piano this system is referred to as ‘touch sensitivity’.
  • Page 56 Virtual Technician Touch (cont.) 1. Selecting the Touch setting Enter the Virtual Technician menu (page 54). 2-1 Touch 2-1 Touch Press the buttons to select the Touch setting. = Normal = Normal 2. Changing the Touch type Press the buttons to cycle through the different Touch 2-1 Touch 2-1 Touch types.
  • Page 57: Voicing

    Voicing The Voicing setting allows the character of the CS6 digital piano to be set to one of six different types. Voicing type Voicing type Description Normal The normal tonal character of an acoustic piano throughout the entire dynamic range. Mellow 1 A softer, more mellow tonal character throughout the entire dynamic range.
  • Page 58: Damper Resonance

    Virtual Technician Damper Resonance Depressing the sustain pedal of an acoustic piano raises all dampers, allowing the strings to vibrate freely. When a note or chord is played on the piano with the sustain pedal depressed, not only will the strings of the notes played vibrate, but also the strings of other notes, vibrating in sympathetic resonance.
  • Page 59: String Resonance

    String Resonance String Resonance refers to a phenomenon that exists in acoustic pianos whereby the strings of held notes resonate ‘sympathetically’ with other notes of the same harmonic series. The CS6 digital piano recreates this phenomenon, with the String Resonance setting allowing the volume of this resonance to be adjusted.
  • Page 60: Key-Off Effect

    Virtual Technician Key-off Effect When playing an acoustic piano - particularly in the bass region of the keyboard - if a key is played with force and released quickly, it is often possible to hear the faint sound of the damper touching the strings immediately before the vibrations are stopped.
  • Page 61: Temperament

    Temperament The Temperament setting allows the tuning system used by the CS6 digital piano to be changed from the modern ‘Equal Temperament’ standard to one of the various musical temperaments popularised during the Renaissance and Baroque periods. Available Temperament types Temperament type Description This is the default temperament.
  • Page 62 Virtual Technician Temperament (cont.) 1. Selecting the Temperament setting Enter the Virtual Technician menu (page 54). 2-7 Temperament 2-7 Temperament Press the buttons to select the Temperament setting. = Equal(P.only) = Equal(P.only) 2. Changing the Temperament type Press the buttons to cycle through the different 2-7 Temperament 2-7 Temperament Temperament types.
  • Page 63: Key Of Temperament

    Key of Temperament The Key of Temperament setting allows the key of the selected temperament to be specified. When using a temperament other than equal temperament, use this setting to specify the key signature of the piece. * This setting will only affect the ‘balance’ of the tuning system, the pitch of the keyboard will remain unchanged. 1.
  • Page 64: Key Settings

    Key Settings The Key Settings menu contains settings that affect instrument operation when using the Dual or Split modes. Key Settings Page no. Setting name Explanation Default setting Lower Octave Shift Raise the pitch of the lower section in octave steps when using Split mode. 0 Lower Pedal On/Off Enable/disable sustain pedal for the lower section when using Split mode.
  • Page 65: Lower Octave Shift

    section Lower Octave Shift The Lower Octave Shift setting allows the pitch of the lower section when using Split mode to be raised in octave steps. 1. Selecting the Lower Octave Shift setting Enter the Key Settings menu (page 64). 3-1 LowerOctave The Lower Octave Shift setting will be selected automatically.
  • Page 66: Layer Octave Shift

    section Key Settings Layer Octave Shift The Layer Octave Shift setting allows the pitch of the layered sound (shown in the second line of the LCD display) when using Dual mode to be raised or lowered in octave steps. 1. Selecting the Layer Octave Shift setting Enter the Key Settings menu (page 64).
  • Page 67: Layer Dynamics

    Layer Dynamics When using Dual mode, sometimes simply adjusting the volume balance between the two layered sounds is not enough to create the desired sound character, especially if both sounds are very dynamic. Layering two equally dynamic sounds can prove difficult to control and play comfortably. The Layer Dynamics Function allows the dynamic sensitivity of the layered sound to be reduced, in order to improve the blend between the two combined sounds.
  • Page 68: About Midi

    About MIDI The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting musical instruments, computers, and other devices to allow the exchange of performance data. MIDI terminals MIDI terminal Function MIDI IN Receiving note, program change, and other data. MIDI OUT Sending note, program change, and other data.
  • Page 69: Midi Functions

    section MIDI functions The CS6 digital piano supports the following MIDI functions: Transmit/receive note information Transmit/receive Program Change number Transmit/receive note information from a MIDI-connected Transmit/receive program change data to/from a MIDI- musical instrument or device. connected musical instrument or device. Transmit/receive channel settings Transmit/receive pedal data Specify transmit/receive channels within the range of 1 to 16.
  • Page 70: Midi Settings

    MIDI Settings MIDI Channel (transmit/receive) The MIDI Channel setting allows the transmit/receive channel to be specified. The selected channel will function as both the transmit and receive channel (separate transmit/receive channels cannot be specified). 1. Selecting the MIDI Channel settings Enter the MIDI Settings menu (page 69).
  • Page 71: Send Program Change Number

    section Send Program Change Number The Send Program Change Number function allows the CS6 digital piano to transmit a program change number from 1 to 128. 1. Selecting the Send Program Change Number function Enter the MIDI Settings menu (page 69). 4-2 Send PGM # 1 (UP+DOWN) Press the...
  • Page 72: Transmit Program Change Numbers

    MIDI Settings Transmit Program Change Numbers The Transmit Program Change Numbers setting determines whether or not the CS6 digital piano will transmit program change information via MIDI when the instrument’s panel buttons are pressed. Transmit Program Change Number settings Transmit PGM# setting Multi-timbral setting Effect of pressing panel buttons Off, On1...
  • Page 73: Multi-Timbral Mode

    Multi-timbral Mode The Multi-timbral Mode setting determines whether or not the CS6 digital piano is able to receive MIDI information on more than one MIDI channel simultaneously. This allows the instrument to play back multi- track, multi-timbral performance data sent from an external MIDI device. Multi-timbral Mode settings Multi-timbral Mode setting Effect on sound heard...
  • Page 74: Channel Mute

    MIDI Settings Channel Mute The Channel Mute setting determines which MIDI channels (1-16) are activated to receive MIDI information when Multi-timbral mode is enabled. This setting is available only when Multi-timbral mode is enabled. 1. Selecting the Channel Mute setting Enter the MIDI Settings menu (page 69).
  • Page 75: Usb Midi (Usb To Host Connector)

    Windows 2000 http://www.kawai.co.jp/english Windows Vista (no SP) * After driver installation, ensure that the ‘Kawai USB MIDI’ device is correctly selected in the application software. USB MIDI is not supported. Windows Vista 64-bit (no SP) Please upgrade to service pack 1 or service pack 2.
  • Page 76: Usb Menu

    USB Menu The USB Menu contains functions to load and save recorder songs from/to a USB memory device. This menu also allows files to be renamed and deleted, and for the USB memory device to be formatted. USB Menu Page no. Function name Explanation Load Song Load a recorder song from a USB memory device into the instrument’s internal memory.
  • Page 77: Load Song

    section Load Song The Load Song function allows recorder songs stored on a USB memory device to be loaded into the instrument’s internal memory. 1. Selecting the Load Song function Enter the USB menu (page 76). 5-1 Load Song ≥Press[F] The Load Song function will be selected automatically.
  • Page 78: Save Song

    USB Menu Save Song The Save Song function allows recorder songs stored in the instrument’s internal memory to be saved to a USB memory device. Once saved, this data can be played back or edited using computer software. 1. Selecting the Save Song function Enter the USB menu (page 76).
  • Page 79: Rename

    section Rename The Rename function allows song and audio files stored on a USB memory device to be renamed. 1. Selecting the Rename function Enter the USB menu (page 76). 5-3 Rename Press the buttons to select the Rename function, then ≥Press[F] press the FUNCTION button.
  • Page 80: Delete

    USB Menu Delete The Delete function allows song and audio files stored on a USB memory device to be deleted. 1. Selecting the Delete function Enter the USB menu (page 76). 5-4 Delete Press the buttons to select the Delete function, then ≥Press[F] press the FUNCTION button.
  • Page 81: Format

    Format The Format function allows a USB memory device to be formatted, erasing all stored data. 1. Selecting the Format function Enter the USB menu (page 76). 5-5 Format Press the buttons to select the Format function, then ≥Press[F] press the FUNCTION button. 2.
  • Page 82: Power Setting Menu

    Power Setting menu Auto Power Off The CS6 features a power saving function that can be used to automatically turn off the instrument after a specified period of inactivity. Auto Power Off setting Auto Power Off setting Explanation The Auto Power Off function is disabled. 30 min.
  • Page 83: Appendix

    Appendix Troubleshooting Problem Possible Cause and Solution Page no. Check that the power cable is firmly attached to the instrument, and The instrument does not turn on. p. 12 connected to an AC outlet. Check that the MASTER VOLUME slider is not set to the lowest position. p.
  • Page 84: Connecting To Other Devices

    Connecting to Other Devices Connect the instrument to Audio equipment Connect the stereo outputs external MIDI devices. or electronic from other electronic instruments instruments or audio equipment to the instrument’s speakers. B pin Connect the instrument to external speakers, amplifiers, mixers, etc. Connect the instrument to a computer to exchange MIDI data.
  • Page 85 section LINE IN jacks (1/4” phone jack) LINE IN STEREO jack (1/8” mini jack) These jacks are used to connect a pair of stereo outputs This jack is used to connect the stereo output from an external from other electronic instruments or audio equipment to audio device, such as a CD or MP3 player, to the instrument’s the instrument’s speakers.
  • Page 86: Sound List

    Sound List PIANO 1 HARPSI & MALLETS Concert Grand Harpsichord Concert Grand 2 Harpsichord 2 Studio Grand Vibraphone Studio Grand 2 Clavi Mellow Grand Marimba Mellow Grand 2 Celesta Jazz Grand STRINGS Jazz Grand 2 Slow Strings PIANO 2 String Pad Pop Piano Warm Strings Pop Piano 2...
  • Page 87: Demo Song List

    Composer PIANO 1 Concert Grand Liebesträume No.3 Liszt Concert Grand 2 Petit chien Chopin Studio Grand Original Kawai Studio Grand 2 Original Kawai Mellow Grand Sonata No.30 Op.109 Beethoven Mellow Grand 2 La Fille aux Cheveux de Lin Debussy PIANO 2...
  • Page 88: Drum Rhythm List

    Drum Rhythm List No. Rhythm No. Rhythm 8 Beat 1 Hip Hop 3 8 Beat 2 Hip Hop 4 8 Beat 3 Techno 1 16 Beat 1 Techno 2 16 Beat 2 Techno 3 16 Beat 3 Heavy Techno 16 Beat 4 8 Shuffle 1 16 Beat 5 8 Shuffle 2...
  • Page 89: Program Change Number List

    Program Change Number List Multi-timbral mode = off/on1 Multi-timbral mode = on2 Sound type Bank Program number Program number PIANO 1 Concert Grand Concert Grand 2 Studio Grand Studio Grand 2 Mellow Grand Mellow Grand 2 Jazz Grand Jazz Grand 2 PIANO 2 Pop Piano Pop Piano 2...
  • Page 90 Program Change Number List Multi-timbral mode = off/on1 Multi-timbral mode = on2 Sound type Bank Program number Program number STRINGS Slow Strings String Pad Warm Strings String Ensemble Soft Orchestra Harp VOCAL & PAD Choir Pop Ooh Pop Aah Choir 2 Jazz Ensemble Pop Ensemble New Age Pad...
  • Page 91: Assembly Instruction

    Assembly Instruction Please read these assembly instructions thoroughly before attempting to assemble the CS6 digital piano. Please ensure that two or more people work on assembling the CS6 digital piano, especially when lifting the main body of the instrument onto the stand in step 3. Included parts Before attempting to assemble the CS6 digital piano, ensure that all parts below are included.
  • Page 92: Assembly Instructions

    Assembly Instructions 2. Attaching the back board d Allow the assembled pedal board and side panels to stand upright (vertically) on the floor. Temporarily fix the back board d to the left and right side panels using the four long black tapping screws h, leaving a tightening allowance of approximately 1-2 mm.
  • Page 93 4. Attaching the front under board c Attach the front under board c to the metal brackets located underneath the main body using three short black screws k. 5. Connecting the pedal and power cables Binder Connect the pedal cable originating from the pedal board to the PEDAL terminal located on the rear of the main body, below the speaker box.
  • Page 94: Specifications

    Specifications Kawai CS6 digital piano Keyboard 88 wooden keys RM3 Grand action with Ivory Touch and Let-Off Sound Source Ultra Progressive Harmonic Imaging™ (UPHI) Internal Sounds 60 voices Polyphony max. 192 notes Display 16 x 2 characters LCD Reverb Room 1, Room 2, Stage, Hall 1, Hall 2...
  • Page 95: Midi Implementation Chart

    MIDI Implementation Chart Kawai CS6 digital piano Date : Dec ’10 Version : 1.0 Function Transmit Receive Remarks At power-up Basic channel Settable 1 - 16 1 - 16 ** Omni mode is on at At power-up Mode 3 Mode 1 power-up.
  • Page 96 CS6 Owner’s Manual KPSZ-0457 : 817025 OW1052E-S1012 Version 1 Printed in Indonesia Copyright © 2010 Kawai Musical Instruments Mfg. Co.,Ltd. All Rights Reserved.

Table of Contents