Kawai CP 209 Owner's Manual page 32

Page
32
Here are some guidelines for Effect Priority:
Example
3
Assume that your CP is set up according to the following chart:
If you then select a different sound for RIGHT1, the Effect setting for the SOLO, RIGHT2, LEFT will be turned
off automatically. This is because RIGHT1 is the Priority Part (note that the SOLO Part is NOT the Priority Part
because it was inactive).
The chart would now look like this:
Even if you now assign a new sound to the SOLO Part, the Effect settings for the other Parts won't change, because
SOLO is still inactive, so therefore would not have priority.
Once you make the SOLO Part active, however, it would now be considered the Priority Part. The Effect settings
for the other Parts will again be turned off.
At this point, if the Effect that has been called up along with the SOLO sound is one that you'd like to use for the
other Parts, simply select Effect On in the LCD display for those Parts.
Priority is given to the Parts in the following order: SOLO>RIGHT1>RIGHT2>LEFT. This means that anytime the SOLO
Part is active, its Effect settings will be used, not only for its sound but for any sound in any other Part, that you want to
add effects to. Likewise, the only time an active LEFT Part's settings will be applied is if the other 3 Parts are inactive.
Unlees you change them, the Effect settings will only change in response to a change in the Priority Part being activated/
deactivated, or a new sound is assigned to an active Priority Part. In the latter case, the new Effect settings will reflect
the Preset effect settings for the new sound.
When the Effect settings change for the Piority Part, the Effects will be automatically turned off for the other Parts. (This
is so that your Flute sound on RIGHT2 doesn't suddenly get effected by the Distortion settings of the Electric Guitar that
you've just assigned to the SOLO Part!)
You can, however, turn the effect on for any Part by adjusting the Effect On/Off option in the display for that Part.
SOLO
Part Inactive
Effect On
SOLO
Part Inactive
Effect Off
SOLO
Part Active
Effect Off
RIGHT1 RIGHT 2
Active Inactive
On Off
RIGHT1 RIGHT 2
Active Inactive
On Off
RIGHT1 RIGHT 2
Active Inactive
Off Off
LEFT
Active
On
LEFT
Active
Off
LEFT
Active
Off