Transmit Program Change On / Off - Kawai CN43 Owner's Manual

Page
82

17) TRANSMIT PROGRAM CHANGE ON / OFF

This function determines whether the CN43 piano will transmit program change information when pressing the
SOUND SELECT buttons.
When set to ON and with Multi-Timbral mode set to OFF or ON1, pressing the SOUND SELECT buttons will send
the program change numbers listed in the left half of the chart on page 86 to 93 via MIDI.
When Multi-Timbral mode is set to ON2, pressing the SOUND SELECT buttons will send the program change
numbers listed in the right half of the chart on pages 93-100 via MIDI.
In addition to SOUND SELECT buttons, other button operations such as Touch Curve, DUAL, Digital Effect, and
Reverb settings can also be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to OFF no program change or other panel information will be transmitted via MIDI.
1
Step 1
Press the MENU buttons to select the Transmit Program Change ON/OFF function.
17 Transmit PGM
ON or OFF will be shown on the second line of the LCD screen.
Step 2
Press the VALUE buttons to turn the Transmit Program Change function ON or OFF.
Step 3
Press any one of the SOUND SELECT buttons to exit the menu.
8
Please refer to page 84 for information regarding Multi-Timbral mode.
= On
The Transmit Program Change ON/OFF function will return to the default setting of 'ON' each time the power is turned
off.
Use the USER MEMORY function (page 87), to save the desired Transmit Program Change ON/OFF setting, allowing
the current Transmit Program Change ON/OFF setting to remain even after the power is turned off.
When using DUAL or SPLIT mode, ON, OFF information and sound type settings for each mode are transmitted as
exclusive data, but program numbers will not be transmitted.
Program numbers will also be transmitted when Multi-Timbral mode is on.
2