System Component Connections; Outside Dimension Drawing - Panasonic AK-HRP200G Operating Instructions Manual

Setting up the unit
(continued)

System component connections

Connection example:
AK-HCU200
12V IN LAN
AK-HRP200

Outside dimension drawing

Unit: mm (inch)
ROP cable
RS-422 PREVIEW
CCU
SIGNAL GND
46(1-13/16)
AUTO
HEAD VF
BARS WHITE BLACK SET UP
POWER POWER
TEST
KNEE DTL SHUTTER
OFF
5600K MATRIX SKINDTL OFF ON
STEP/SYNC
SCENE/USER FILE
SHIFT SCENE 1 SCENE 2 SCENE 3 SCENE 4 STORE
USER 1 USER 2 USER 3
GAIN
VR LOCK
DTL FLARE/PED
UP
ND CC SHT SYNC CAMERA
M.GAIN M.PED 10-19
DATA
SET
No.
IRIS
DOWN DISPLAY SELECT
SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN SAVE/LOAD EXIT EXECUTE
CHARA IRIS/M.PED LOCK IRIS M.PED
PUSH
MENU
PREVIEW
TALLY/CALL
ALM OPT
SENSE
SELECT EXT
D.EXT
AUTO COARSE
CLOSE OPEN
CLOSE FULL
46(1-13/16)
92(3-5/8)
1.
Connect the CCU connector on this unit to the ROP
connector on the CCU rear panel using a dedicated ROP
cable (sold separately).
2. After having connected all the components, turn the CCU
main power on, and then turn the camera on.
<Note>
• If no camera is connected, the number of CCU functions that this unit
can control is limited.
• Turn off the CCU before disconnecting the ROP cable.
55(2-3/16)
53(2-1/16)
20.3(13/16)
120(4-3/4)
9