ZyXEL Communications ZyWALL OTPv2 Support Notes page 58

Support notes

Hide thumbs Also See for ZyWALL OTPv2:

Table of Contents

ZyXEL

– ZyWALL OTPv2 Support Notes

Step4. Enable Remote Access.

1) To allow the user to log in via SSL VPN, you have to enable the Remote Access Permission for this user.

2) Right click the OTP user, and then click "Properties". Go to the "Dial-in" tab and choose "Allow access".

Step5. Change the sequence of entering OTP and PIN for authentication

By Safenet default setting the password entry sequence is OTP + PIN. You should change this sequence to

match ZyWALL USG's behavior (PIN+OTP). Here is the instruction for this.

SCCservers.ini

1) Go to C:\Program files\Aladdin\SafeWord\Servers\Shared\ folder and open the file

(use Notepad for editing).

# Set this to 'on' to force SoftPin to precede the password

2) Search for the string: "

Pin_Before_Password=off

3) At the command "

", change the value to 'on'.

4) Reload the SafeWord server.

Table of Contents