Find Help; Support; Remote Configuration - Nokia E63 User Manual

Find help

Support

When you want to learn more about how to use your product
or you are unsure how your device should function, go to
www.nokia.com/support, or using a cellular phone,
www.nokia.mobi/support. You can also select
Help Help in your device.
>
If this does not resolve your issue, do one of the following:
• Switch off the device, and remove the battery. After about
a minute, replace the battery, and switch on the device.
• Restore the original factory settings.
• Update your device software.
If your issue remains unsolved, contact Nokia for repair
options. Go to www.nokia.com/repair, or in Latin America,
www.nokia-latinoamerica.com/centrosdeservicio. Before
sending your device for repair, always back up the data in
your device.

Remote configuration

Select Menu Tools
> >
With Device manager, you can manage settings, data and
software on your device remotely.
You can connect to a server and receive configuration settings
for your device. You may receive server profiles and different
© 2010 Nokia. All rights reserved.
Menu
Device mgr..
configuration settings from your service providers or
company information management department.
Configuration settings may include connection and other
settings used by different applications in your device. The
available options may vary.
The remote configuration connection is usually started by the
>
server when the device settings need to be updated.
To create a new server profile, select
profile.
You may receive these settings from your service provider in
a configuration message. If not, define the following:
Server name
•
server.
Server ID — Enter the unique ID to identify the
•
configuration server.
Server password
•
device to the server.
Session mode
•
Access point
•
connection or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet
Host address
•
configuration server.
Port — Enter the port number of the server.
•
Options
— Enter a name for the configuration
— Enter a password to identify your
— Select the preferred connection type.
— Select the access point to use for the
as the bearer type.
— Enter the web address of the
New server
>
9