Configuration; Security; Software Updates Over The Air; Software Update Settings - Nokia 3109 classic User Manual

S e t t i n g s
Automatic answer — to set the device to answer an incoming call automatically after 5 seconds. If
•
to Beep once or Off, automatic answer is off.
Lights — to set the lights permanently On. Select
•
Text phone — Select
•

Configuration

You can configure your device with settings that are required for certain services. Your service provider may also send you these
settings. See "Configuration setting service," p. 7.
Select Menu Settings
>
Default configu- ration settings
•
the service provider as default settings, select
Activate default in all applications
•
Preferred access point
•
the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Connect to service provider support
•
Device manager settings
•
available, depending on your device.
Personal configu- ration settings
•
them. To add a new personal account if you have not added any, select
Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected
service type. To delete or activate a personal account, scroll to it, and select

Security

When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing), calls may be
possible to the official emergency number programmed into your device.
Select Menu Settings
>
PIN code request and
•
switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a specific device feature which is protected
•
by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls from your device (network service). A barring password
•
is required.
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card.
•
When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection.
In this case, the recipient's phone number and the message center number must be included in the fixed dialing list.
Closed user group — to specify a group of people whom you can call and who can call you (network service)
•
Security level — Select
•
device. If you select Memory, the device asks for the security code when the SIM card memory is selected, and you want to
change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or barring password
•
Code in use — to select whether the PIN code or UPIN code should be active
•
Authority certificates
•
device. See "Certificates," p. 38.
Security module settings
•
and signing PIN. See "Access codes," p. 7.

Software updates over the air

Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the
installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.
Your service provider may send device software updates over the air directly to your device (network service). This option may
not be available, depending on your device.

Software update settings

To allow or disallow software updates, select
provider software updates
Always allow — to perform all software downloads and updates automatically
•
Always reject — to reject all software updates
•
Confirm first — to perform software downloads and updates only after your confirmation (default setting)
•
© 2007 Nokia. All rights reserved.
Use text phone Yes to use this setting instead of headset or loopset settings.
>
Configuration and from the following options:
>
— to view the service providers saved in the device. To set the configuration settings of
Options
— to activate the default configuration settings for supported applications
— to view the saved access points. Scroll to an access point, and select
— to download the configuration settings from your service provider
— to allow or prevent the device from receiving software updates. This option may not be
See "Software updates over the air," p. 28.
— to manually add new personal accounts for various services and to activate or delete
Security and from the following options:
>
UPIN code request — to set the device to ask for your PIN or UPIN code every time the device is
Phone to set the device to ask for the security code whenever a new SIM card is inserted into the
or User certificates — to view the list of the authority or user certificates downloaded into your
— to view Security module
Menu
and the following options:
Automatic to set the lights on for 15 seconds after a keypress.
Set as default.
>
Add
details, activate Module PIN
Settings Configuration
> >
28
Incom. call alert:
Options
new; otherwise, select Options
Options Delete or Activate.
>
request, or change the module PIN
Device manager settings
>
is set
Details to view
>
Add new.
>
Service
>