Connecting Serial Ata Ii - AOpen i945Ga-PHS User Manual

Connecting Serial ATA II

To connect a serial ATA II disk, you have to have a 7-pin serial ATA cable. Connect
two ends of the serial ATA II cable to the serial ATA II header on the motherboard
and the disk. Like every other traditional disk, you also have to connect a power
cable. Please be noted that it is a jumper free implement; you don't need to set
jumpers to define a master or slave disk. When serial ATA II hard disks are
installed on serial ATA II ports, the one connected on Port0 (SATA1) will be set as
the first boot device automatically. Please note that it doesn't support
Hot-Plug in function.
SATA1
SATA2
SATA6 SATA5 SATA3 SATA4
19