Additional Information; Optional System Settings - Pioneer HTZ585DVD-AP Operating Instructions Manual

14

Additional information

Chapter 14
Additional information

Optional system settings

See the notes in each section for more
information about the settings. The first setting
in each section is the default.
Press SHIFT+SETUP and use / to
1
select SYS SET then press ENTER.
Use / then ENTER to choose the
2
setting you want to adjust.
The available settings are shown in the front
1
panel display.
Use / to adjust then press ENTER to
3
confirm and exit.
Dimming the display
You can adjust the brightness of the text in the
front panel display.
• LIGHT – Brighter setting
• DARK – Darker setting
Key lock setting
• LOCK ON – Makes the front panel buttons
and controls inoperative.
• LOCK OFF – Restores regular use of the
front panel buttons and controls.
Frequency step setting
Not applicable to Saudi Arabia, Israel, South
Africa, other middle eastern contries and duty
free models
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
• AM 9K
• AM 10K
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without
color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV
has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands
at the top and bottom of the screen.
50
En
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region's system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
After using / to choose TV SYS (step
•
3 above), press ENTER to change the TV
system as follows:
• AUTO  NTSC
• NTSC  PAL
• PAL  AUTO
• Press ENTER while CHANGE is blinking.
The system will automatically enter standby
mode, then turn on again. You'll see the new TV
system setting in the display after seeing
POWER ON.
Media Type Format NTSC
DVD/Super VCD/ NTSC
Video CD/DivX
PAL
Video/WMV
—
CD/MP3/WMV/
MPEG-4 AAC/
JPEG/no disc
2
Player setting
PAL AUTO
NTSC PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or
PAL