Yamaha MAJESTY YP250 Owner's Manual page 66

2
1
1. Engine oil drain bolt
2. Washer
4. Check the washer for damage
and replace it if necessary.
5. Install the washer and the engine
oil drain bolt, and then tighten
the drain bolt to the specified
torque.
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m0kgf)
NOTE:
Make sure that the washer is properly
seated.
PERIODIC MAINTENANCE AND MINOR REPAIR
6. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil
filler cap.
Recommended engine oil:
See page 8-1.
Oil quantity:
Periodic oil change:
1.2 L
Total amount (dry engine):
1.4 L
cC
8 Do not put in any chemical
additives or use oils with a
grade of CD or higher. Also, be
sure not to use oils labeled
"ENERGY CONSERVING
higher.
8 Be sure no foreign material
enters the crankcase.
6-16
7. Start the engine, and then let it
idle for several minutes while
checking it for oil leakage. If oil is
leaking, immediately turn the
engine off and check for the
cause.
8. Reset the oil change indicator
light according to the following
procedure.
EC000030
II " or
6