Replacing A Headlight Bulb - Yamaha XMAX YP250R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing a headlight bulb

This model is equipped with two
quartz bulb headlights. If a headlight
bulb burns out, replace it as follows.
1. Remove cowling B. (See page
6-6.)
2. Disconnect the headlight coupler,
and then remove the bulb cover.
6
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb hol-
der, and then remove the defecti-
ve bulb.
EAU23730
1. Headlight bulb holder
s WARNING
s
Headlight bulbs get very hot. The-
refore, keep flammable products
away from a lit headlight bulb, and
do not touch the bulb until it has
cooled down.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
6-27
1
1. Do not touch the glass part of the bulb.
EWA10790
CAUTION:
Take care not to damage the follo-
wing parts:
●
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it
free from oil, otherwise the
transparency of the glass, the
luminosity of the bulb, and the
bulb life will be adversely affec-
ted. Thoroughly clean off any
dirt and fingerprints on the
headlight bulb using a cloth
moistened with alcohol or thin-
ner.
ECA10650