Yamaha XCITY VP250 Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
Odometer and tripmeter modes
Pushing the "MODE" button switches
the display between the odometer
mode "Total" and the tripmeter modes
"Trip" in the following order:
Total → Trip 1 → Trip 2 → Trip/fuel →
Total
3
"Mode"
1 2
"Mode"
3
4
"Mode"
ZAUM0391
1. Total
2. Trip 1
3. Trip 2
4. Trip/Fuel
TIP
●
The Trip/fuel odometer is only acti-
vated if the fuel level warning light
comes on.
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
Trip 1 or Trip 2 → Time 1 or 2 → Aver-
age speed 1 or 2 → Trip 1 or Trip 2
"Mode"
ZAUM0392
1. Distance
2. Time
3. Average speed
If the fuel level warning light comes on
(See page 3-2.), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
counting the distance traveled from that
point. In that case, pushing the "MODE"
button switches the display between
the various tripmeter and odometer
modes in the following order:
Trip/Fuel → Trip 1 → Trip 2 → Total →
Trip/fuel
1
"Set"
2
"Set"
ZAUM0393
"Set"
To reset a tripmeter, select it by push-
ing the "MODE" button, and then push
3
the "SET" button for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
Clock mode
To set the clock:
1. When the display is in the "Total"
2. When the hour digits start flashing,
3-4
mode, push the "SET" button for at
least two seconds.
push the "SET" button to set the
hours.