Yamaha XMAX YP125R Sports Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Fuel reserve tripmeter
To reset a tripmeter, select it by push-
ing the "SELECT" button until "Trip" or
"Trip F" begins flashing ("Trip" or "Trip
F" will only flash for five seconds).
While "Trip" or "Trip F" is flashing, push
the "RESET" button for at least one
second. If you do not reset the fuel re-
serve tripmeter manually, it will reset it-
self automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
TIP
The display cannot be changed back to
"Trip F" after pushing the "RESET" but-
ton.
Fuel meter
With the key in the "ON" position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter disappear towards "E"
(Empty) as the fuel level decreases.
When the fuel level reaches the bottom
segment near "E", the fuel level warn-
ing indicator and the bottom segment
will flash. Refuel as soon as possible.
Coolant temperature meter
With the key in the "ON" position, the
coolant temperature meter indicates
the temperature of the coolant. The
coolant temperature varies with chang-
es in the weather and engine load. If
the top segment and coolant tempera-
3-8
ture warning indicator flash, stop the
vehicle and let the engine cool. (See
page 6-36.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Oil change indicator "OIL"
This indicator flashes at the initial 1000
km (600 mi), then at 6000 km (3500 mi)
and every 6000 km (3500 mi) thereafter
to indicate that the engine oil should be
changed.
After changing the engine oil, reset the
oil change indicator. (See page 6-10.)
If the engine oil is changed before the
oil change indicator comes on (i.e. be-
fore the periodic oil change interval has
ECA10021