How To Load Your Washer - GE WWA7600S Use And Care Manual

Ge washer user manual
Hide thumbs Also See for WWA7600S:
Table of Contents

Advertisement

HOW TO LOAD YOUR WASHER

This illustration, with clothes just
reaching the Clothes Retaining
Ring, shows a proper load. Clothes
have ample room to move because
they are not packed down, nor
wrapped around the agitator.
Clothes are loaded dry since wet
items are likely to pack down
which encourages overloading.
This size load requires a full
water fill.
What is the best size load of
clothes—large, medium, or
small? Save time, energy and
detergent by avoiding extra use of
the washer. Try to wash a full load
of clothes. If you can it is better to
save clothes until you have a full
load. [f you must wash smaller
loads, save water, energy and
detergent by adjusting the water
level for the size of the load. See
Operating Instructions.
To Add Items After the Washer Has Started
Turn off the washer by pushing in the Cycle
Selector knob.
to the agitator.
Special Recommendations for Washing Permanent Press If You Do Not Have a Dryer
If you are machine-washing permanent press clothes
that you plan to line dry or drip-dry, use extra care to
minimize wrinkling in the wash process:
and hang immediately.
Load clothes dry.
Take a properly sorted group of
clothes and drop them loosely in
the wash basket in this order:
Large items—like sheets. Do
not wrap around the agitator.
Small items—like
washcloths.
Medium size items—like
towels.
DO NOT OVERLOAD YOUR
WASHER.
Try to mix large and small items
in each machine load for better
washing action.
Wash large items (blankets, bed
spreads, mattress pads, etc. )
separately.
If machine is overloaded, you
may experience oversudsing or
out of balance conditions.
NOTE: When washing stockings, panty hose and
other easily tangled items, always handle separately.
To minimize tangling, we recommend the use of a net
laundry bag.
clothes must have ample room to move freely. A
medium size permanent press load is the largest
that should be washed.
Use more water than you would for a regular load.
Use a medium water level for a small load. Use an
extra large water level for a medium load.

Advertisement

Table of Contents
loading

Table of Contents