HeaDLIGHtS: changing bulbs
1
a
B
The bulbs detailed below can be re-
placed. However, we recommend that
these be replaced by an approved
Dealer if this proves difficult.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
(1/2)
2
3
Direction indicator lights
Unscrew bulb holder 1 to release it and
then replace the bulb.
Bulb type: PY21W.
Front side light
Remove cover B, pull on bulb holder
wire 2, remove the bulb and replace it.
Bulb type: W5W.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
Daytime running light
(depending on the vehicle)
Remove cover B, turn bulb holder 3 to
release it then replace the bulb.
Daytime running light bulb type:
P21LL.
Discharge bulb main beam
headlights/dipped beam
headlights
Never open cover A
Bulb type: D1S.
Due to the danger involved
in handling high-voltage de-
vices, this type of bulb must
be replaced by an approved
dealer.
A special mounting is re-
quired to fit this type of
headlight, it is forbidden to
fit a headlight with xenon
bulbs to a vehicle which was not
designed for it.
5.13